How To Cut On Hills With A Riding Mower

Riding Mower photo

Once you understand how to cut on hills with a riding mower you’ll understand it’s easy stuff. It just takes a few tips and caution.

Some folks tend to want to cut straight uphill or side to side. Neither is really a good choice. If you go straight up you’re likely to wear the rider out before it’s time. If you go from side to side, your chances of tipping over increase greatly.

Horsepower and transmission play the major factors in how to cut on hills with a riding mower. If you have a single hydraulic transmission, you’ll want to mow straight up and then reverse it down the hill as you cut the next row. The reason you’ll want to back down in reverse is because the downhill wheel gets all the traction. Backing down will keep the mower from sliding.

With dual hydrolics, you’re able to cut on hills with a riding mower properly as long as you use caution.

1. Don’t mow when the grass is wet. It’s usually never good to mow when it’s wet and when you’re mowing hills, it’s really not advised. Wet grass is not only harder to mow, it also get clogged in the mower. But the real problem is that the mower can slip. The steeper the slope, the more your chances increase. So always check the grass before you begin. Make sure the morning dew is dry.

2. Using a riding mower with dual hydrolics, you’re going to want to cut up the hill and cross ways at an angle of about 40 degrees, give or take a few degrees (but only a few). As long as your rider is a dual hydro, you can then turn and go down the hill because it has the traction that it will need to go down the hill without sliding.

3. Make sure you understand your oil mix. As you’re mowing on an angle, if you do this for a big chunk of time, this will impede the lubrication your rider needs. It also helps to vary the swath.

If you’re shopping for the best riding mowers for hills, we have what we’ve found to be the Top 3 riders for people on hilly terrain. The ones we have listed are all new models.

However, if you would rather buy a used riding mower that’s fine too. There are riding mower auctions on eBay and you can occasionally find a good deal. Look for a good older John Deere model. Make sure it’s got from 12 (ok) to 18 (perfect) horsepower. Also, you want at least a hydrostatic and preferably a dual hydro. John Deere Sabre’s are good ones if you can find them. Expect to pay from $1,200 – $1,800 for a good used John Deere.

Now maybe, after reading this, you don’t have that much of a hill to mow, below is a video of how some people mow hills (they have a separate lawn mower for this). It actually works really well.

A Glimpse on Using Weed Eaters

cut grass photo

Do you have lawn lots of garden at home? If you have a garden, whether small or big, it is always essential to maintain its beauty and cleanliness. So, how do you clean and maintain its beauty? Of course, there’s a need for you to use some sorts of gardening tools to ensure fast and good results. One of the best tools that would help in your gardening procedures is the weed eater. This type of tool can provide great results in terms of getting rid of tough grasses and weeds in driveways, garden, patios and even along edges of your garden.

In getting rid of these tough grasses, unwanted plants and weeds in your garden, you have to make use of a special tool that would give you more benefits. Find the best weed eater and use it to cut the grass without any worry. You may also read and study the succeeding discussions for you to be able to know how to appropriately use a weed eater, depending on your goals.

Cleaning the whole area of your garden would be so simple only if you will only utilize appropriate tools. However, you need to make sure that you know how to make use of these tools so as to successfully have the best results that you are aiming for. For your reference, you may check the following lists about the different tips and considerations that you need to take while utilizing a weed eater:

  • Prepare your tool ahead of time – Of course, the first thing that you need to do is to prepare your weed eater which you will use for your gardening projects. If you will use a gas-powered weed eater, then you need to remove the old fuel first. Then, check the filter if it was exposed from dirt. Once you switch on the machine, you have to check the spark plug and the carburetor first. On the other hand, if you will use an electric type of it, then always check for some loose connections or possible short circuits.
  • Be conscious of the running position – There are some people who utilize the machine in wrong form of position, which may eventually lead to grave injuries. The weed trimmer must be at 90 degrees against edges of the grass. Hold the machine very tightly and see to it that you are comfortable holding the machine before you switch it on.
  • Clear or remove the rocks from your garden – It would be better if you will take away the large pebbles and rocks from your lawn lots because these can hinder your work.
  • Provide yourself with safety materials – Always secure your safety so that you will not experience any problem after utilizing the tool. As much as possible, you need to wear boots with appropriate ear and eye protection while you are utilizing the tool. Also, it is advisable to wear some clothes that are tight so that you can feel comfortable while working. When you are repairing your machine or even changing the setting of it, then you have to switch it off first. Above all, always read the instructional manual and follow all the tips and procedures there before utilizing the weed eater.

With these cited tips and considerations, you can have a guarantee that you will have the best results after using your gardening tool. Thus, your safety will also be secured at all times since you have the ideas about proper procedures and things to do on or before utilizing the weed eater.

Adjusting Weed Eater XT260 Carburetor – A DIY Guide

This Do-it-yourself job can be simple but it may take time for you to find the settings you want. Today we will show you how to adjust the carburetor of a 4-cycle weed eater. It is important to keep tools and equipment well-kept so that they will be useful to you for a longer period of time.

Regardless of the reason adjusting your carburetor correctly is important and worth knowing to save on repair costs. When doing our own tasks budget is very important, and money is already being saved by doing the job ourselves, consideration must be made for the tools needed.

Tools and Substances Needed for Adjusting the Weed Eater XT260 Carburetor

  • Splined Adjustment Tool (alternatively a flathead screwdriver with a splined connector attached)
  • Spark Plug Wrench
  • Fresh Gasoline

Before adjusting the carburetor, checks need to be made to determine the trimmer is starting and functioning properly.

Checks Before Making Adjustments

  • If the trimmer was left for a long period of time since the last time it was used, then the fuel will need to be changed. Drain the stale gasoline from the trimmer and replace it with the fresh one

When it is left for a long time greasy residue starts to collect which blocks up the trimmer. If you see this residue in or around the fuel tank then the performance would be negatively affected, it may not even start. Replacing the gasoline and cleaning the greasy areas are the best options to prevent further buildup of grease from harming the trimmer.

  • If the trimmer was used fairly recently then check the gasoline for water by draining it into a container and looking for pockets of water, if you find water, change. When water is present in the gasoline it reduces performance and causes damage to the engine.
  • Remove the spark plug using the wrench and inspect for grime or carbon, then clean or replace as required.

Once these examinations are made and the results are favorable then adjustments can commence on the Weed Eater carburetor.

Adjusting the Carburetor

On the right side, beyond the starter pull cord, the trimmer has special screws in holes close to each other on the carburetor. They can be adjusted to enhance the performance of the trimmer at low and high speeds. The screw labeled “LO” adjusts the fuel use of the trimmer when the engine is idling while the screw labeled “HI” adjust the fuel use at full power. These special screws were made with the intention to prevent and reduce unwanted tampering of the trimmer so a special tool is required to turn them.

  • Pull the cord to start the trimmer, if it does not start then using the splined adjustment tool turn the LO screw anticlockwise by a quarter of a turn and retry.
  • Repeat until the trimmer starts.
  • Continue turning the LO screw anticlockwise by a quarter of a turn until the trimmer idles effortlessly.
  • If the trimmer is spluttering at full power the HI screw needs to be adjusted.
  • Turn the HI screw all the way clockwise.
  • Give it one full anticlockwise turn and then check if it still splutters at full power
  • Continue turning the HI screw until it can run smoothly at full power.
  • Once satisfied with the adjustments let the trimmer cool down for four hours or more.

Trial and error are involved in adjusting the Weed Eater XT260 carburetor but once everything runs smoothly you can rejoice. The trimmer is ready to return to the field and eager to complete its duty.

Source Links:

Bicycle Shelters Support A Greener City

More and more people are setting aside the time and taking the chance to ride bikes. The addition to the amount of bicyclists can be attributed to a number of factors that have been developing over the last several years. One influence is the rise in the price of gasoline. With the cost of gasoline on the rise, many are trying to drive less and spend less money at the gas pump. Bikes have gained a huge boost from this phenomenon, and it is becoming more likely than ever to see people commute to work by bicycle. Students are also joining in this growth in bicycle usage.

Another reason for the growth in use of the bicycle is the questions about the environment. More and more people are looking for ways to lower the carbon footprint, and they understand that there is no better way to power transportation than with human energy. Riding a bike through the city or throughout the college is also a great way to stay in shape and meet new people that have the same interests.

One problem that comes with riding bicycles is the fact that it can be quite difficult to store them in bad weather locations. Some people may be discouraged from riding a bike in the event that the weather is rainy or not suitable for bike storage. Its important for facilities to consider alternative forms of transportation in their building and structural design.

The solution to this problem that city managers and college planners are finding is the addition of bike shelters. Bike shelters are the perfect choice because they show that you encourage bicycle riding and are committed to encouraging alternative transportation. Schools and cities that actively promote alternative transportation could be eligible for federal grants and tax breaks. In addition, these shelters can send the right message and promote a positive experience for students and citizens alike.

As an added incentive, bike shelters also help reduce traffic and automobile parking problems because they encourage bicycle riding. Imagine the traffic that could potentially be alleviated if more students and citizens choose to ride bicycles as a first mode of transportation.

Bike shelters are available in a wide variety of styles and materials and are sure to match the design scheme of the location you hope to install them. The best companies offer standard models that are tried and tested, easily fitting into your location, or they also often create completely customizable bike shelters. Materials can vary from glass, steel, or polycarbonate, and can be glazed or highlighted in all kinds of textures to make them stand out or blend in.

Pick a bike shelter and send the message that you support alternative transportation.

Choosing the Best Lawn Mower


If you are looking for the best lawn mower for your yard, then you should spare some of your time in choosing the best lawn mower for your needs. You can count on the Riding Lawn Mower Review bestsellers to find the best choices that you can choose from. To get the bestsellers will allow you to have an easy time choosing from the ones that are considered as the best when it comes to such equipment.

Who Could Buy or Benefit from the Product

Those people who are fond of keeping their yard clean from grass should start choosing the best lawn mower from a site where reliable reviews can be found. These people will be assured that they will have an easy time dealing with their needs and make sure that they can get the product that is worth the money that they are willing to spend. There are just many products that can be found in different sites that provide such reviews for lawn mowers.

Product Description

With choosing the best lawn mower, you should have one that is equipped with features that will help into cleaning your entire lawn with ease. You will not have to worry about the risk of losing your patience with parts that are missed by the old mower that you have. The particular product that you should have is the one that passed the standards of people and the one that is suitable for your needs. You can make sure that you will not encounter any problems ion regards with your lawn by just getting the appropriate product for your standards.

Product Features

  • When choosing the best lawn mower the product should have a 13 gauge 54 inches cutting deck
  • Equipped with a 24 horse power Kohler engine that makes the engine last for a long time
  • Should include an electric clutch with 3 blades engagement to make the cutting process easier and more effective than old mowers.
  • Has a dual drive system that is designed with Hydro-Gear EZT for a more effective and easy control of the whole equipment.
  • Maneuverability of the product is designed to ensure that you can make use of it with convenience
  • Has an adjustable seat that allows you to operate the equipment with ease
  • The steering levers are foamed, giving you the time to operate it smoothly


It is important that when you are choosing the best lawn mower, you are able to get the information that the product has in store for the customers. The abovementioned features are just some of the good qualities of a lawn mower that you should get. You can make sure that you are going to have an easy time of dealing with cleaning up your lawn because a mower that is equipped with features that are truly impressive are considered as good qualities. Always remember that you should choose the one that is packed with features that are updated to make sure that it can last for a long time. You can choose to read reviews to make sure that you are able to get the best choices for the lawn mower that will meet your needs. It will be better that you will look for reviews first and make a list of the ones that will pass your standards. After you finalize the list, you can now easily choose the one that will be perfectly suitable for your needs in cleaning your lawn.


The disadvantages that you can get from choosing the best lawn mower is that the difficulty of choosing from the best ones and maintenance that the product needs. But you should also consider these things because after you decide to purchase a unit, you will certainly have to perform the maintenance stuffs to make sure that the product will last for a long time.

Customer Reviews and Scores

Most of the people who are choosing the best lawn mower end up having one that is included in the bestsellers of review sites, just like the ones included in the Riding Lawn Mower Review. People who will get a unit from their bestsellers were satisfied and were impressed with how useful the units are with their needs.


When you start reading Lawn Mower Reviews, you will surely have an easy time of choosing the best lawn mower for your needs. You can get the one that is suited with your needs and have a product that is worth the price that it may have. The reviews that you will read will tell you more about particular products that will allow you to have an easy time of deciding upon the products that you should include in your list and the ones that are highly recommended being purchased due to its usefulness and convenience, as well.